Misc Parts (Bearings, AC Motors, LCD Monitor, Hydraulic Motors, O-Rings, Switches, Valves, Anemometer) (SOLD)

Auction ID 1106
Status Closed
Type Standard (PQT)
Started 5/26/2011 10:50 AM EST
Ended 6/10/2011 1:00 PM EST
Quantity 0
Minimum Bid Increment $10.00
Manufacturer None
Division AEP - Appalachian
Equipment Location AMOS - WINFIELD , WV

Details

Asset ID 11H-220
UOM Lot
Condition Code New Condition (unused)

AEP SURPLUS

Misc Parts (Bearings, AC Motors, LCD Monitor, Hydraulic Motors, O-Rings, Switches, Valves, Anemometer)                                           

Below is a partial listing of the items included.  See the attachment for all items included.

Cat Desc Qty
AIR CONDITIONER, 22000 BTU, 208-230VAC 1PH 60HZ, SELF CONTAINED, W/ 4KW HEATER                                                               1
ANEMOMETER, WIND SPEED TRANSMITTER, LESS THAN 2 KNOTS AND GREATER, DC MAGNET GENERATOR, BAKED ENAMEL COVERED BRASS HSG, WEATHERPROOF         1
BEARING, BALL, CONRAD, DEEP GROOVE, SINGLE ROW, 1.1811 IN ID, 2.4409 IN OD, 0.6299 IN WD, SHIELD                                             1
BEARING, BALL, CONRAD, RADIAL, DEEP GROOVE, SINGLE ROW, 0.984 IN ID, 1.85 IN OD, 0.472 IN WD, C3, STEEL CAGE                                 1
BEARING, BALL, DEEP GROVE, SINGLE ROW, 40MM ID, 80MM OD, 18MM WD, SEALED, STEEL CAGE                                                         1
BEARING, ROD END, SPHERICAL, LH THD, F/ BUCKET CYLINDER                                                                                      1
BEARING, ROD END, SPHERICAL, RH THD, F/ BUCKET CYLINDER                                                                                      1
BEARING, ROLLER, CYLINDRICAL, SINGLE ROW, 100MM ID, 180MM OD, 34MM WD, STEEL CAGE                                                            1
DRIVE, AC MOTOR, 6 HP, 3PH 480VAC 9AMP INPUT, 24VDC OUTPUT, NEMA 1/IP21 ENCLOSURE, 5 IN WD X 12.9 IN HT X 7-1/2 IN DP                        1
MONITOR, VIDEO, LCD COLOR, FLAT PANEL, 12 IN DIAGONAL, 1024 X 768 RESOLUTION, 90-264VAC, 12/24VDC, RESISTIVE TOUCH SCREEN, ALUM BEZEL        1
MOTOR, ELECTRIC, AC, 250 HP, 460VAC, 3PH, 60HZ, 285AMP, 1787 RPM, 449T FRAME, TEFC ENCLOSURE, 1.15 SERVICE FACTOR, CONTINUOUS DUTY, INSUL CL 1
MOTOR, HYDRAULIC, ***, 23.8 GPM INPUT, 22.1 HP OUTPUT, 375 RPM, 3340 PSI CONTINUOUS                                                          2
MOTOR, HYDRAULIC, FIXED DISPLACEMENT, 95.6 GPM OUTPUT, 4500 RPM, AXIAL PISTON, 4 BOLT SAE, 4550 PSI CONT                                     1
O-RING, ***, 0.375 IN ID, 0.5 IN OD                                                                                                          4
O-RING, ***, 13 IN ID, 13.25 IN OD, 0.125 IN WD, 279                                                                                         2
O-RING, ***, 5 IN ID, 5.25 IN OD, 0.125 IN WD, 250                                                                                           1
POWER SUPPLY, AC, 85-132/170-265VAC 47/63HZ                                                                                                  1
RELAY, GENERAL PURPOSE, 10AMP, 2 FORM C, (1) SILVER NICKEL CONTACT, DPDT, 24VDC COIL, PIN TERMINAL, SOCKET MOUNT, TRANSPARENT DUST COVER ENC 4
VALVE, PROPORTIONAL, 20 BAR, PILOT OPERATED, F/ HYDRAULIC CONTROLS                                                                           1
VALVE, PROPORTIONAL, 24V 8AMP, PILOT OPERATED                                                                                                2
VALVE, PROPORTIONAL, 24VDC, PILOT OPERATED, 20 BAR                                                                                           1


Qty: 1 lot (includes all items listed)

Description: Spare parts for Metso Equilibrum Crane. Winning Bidder must take all items included in the lot and remove from the site.  Small items willl be loose in a Gaylord box.

Condition: New Condition

Conditions for sale of AEP Surplus Equipment:

~ Sold AS IS WHERE IS.  No warranty given or implied.
~ Equipment inspection at the potential buyers time and expense and must be scheduled in advance.
~ Buyer will be required to pay state sales taxes unless valid tax exemption is provided.
~ After payment clears, Buyer can arrange for pick up.
Product Attachment Documents Attachment 1

Product Photos


View new and used equipment that AEP no longer needs.

Find Equipment

Place a bid or make an offer on available equipment.

How to Buy Equipment

Create your user account and sign up to participate.

Register Now